All

Jims shaft nuts now give the ultimate in flywheel holding power. The mating face of each nut has been ground to a 32 surface finish and held square to threads within .0005". This in turn will pull the shafts straight into the flywheels and simplify flywheel truing. We didn't stop there! Each nut is machined on state of the art CNC lathes, and heat treated to make these nuts the toughest and best available on the market.

"T" Type Pinion Gear Shaft Key
Fits Big Twin Evolution 1990/1999, K Model & Sportster 1988/1999
Package of 10
Replaces HD# 11219

1" Lowered Kickstand Dresser Models 2007/Later* Use On Lowered Bikes

• When you lower your Dresser model, you have to use a shorter kick stand to allow correct lean angle when your bike is parked
• Handcrafted in the USA, TIG welded and hand polished to accept smooth show quality chrome plating
• Mounts on OE bracket and utilizes the OE kick stand spring
• Will also fit years back to 1984, but lean angles may vary

Pingel
Chrome Plated Kick Stand
Length: 1 Lowered ront, 1 Lowered Rear
Fits Dreser models 2007/Later

100% Barstow Classic Smoke Replacement Lens, Single lens type

• Essential for Classic/Legend Barstow goggles
• Dalloz SunOptics lenses are excellent for filtering of visible light and reduction of the dazzling effects of sunlight, enhance visibility and reduce eye strain while improving the perception of colors; 100% UV protection

100% Barstow Tear Offs, 20-Pack, Accessory

• Get clear vision with a simple pull of the tab
• Available in standard version
• Fit both Classic and Legend Barstow goggles
• Sold in a 20-pack

100% LENS YTH ACC GL MIR/SM AF, Accuri Junior, Anti-Fog

• Motocross essentials for 100% Junior goggles
• All-purpose clear lens provides maximum amount of light allowance for all conditions
• Clear and smoke dual lenses prevent fog build-up in all weather conditions and are ideal for the toughest conditions
• Mirrored lenses offer the maximum reduction of glare in bright light conditions for improved performance

100% LENS YTH ACC SI MIR/SM AF, Accuri Junior, Anti-Fog

• Motocross essentials for 100% Junior goggles
• All-purpose clear lens provides maximum amount of light allowance for all conditions
• Clear and smoke dual lenses prevent fog build-up in all weather conditions and are ideal for the toughest conditions
• Mirrored lenses offer the maximum reduction of glare in bright light conditions for improved performance

100% LENS YTH ACC SM AF, Accuri Junior, Smoke, Anti-Fog

• Motocross essentials for 100% Junior goggles
• All-purpose clear lens provides maximum amount of light allowance for all conditions
• Clear and smoke dual lenses prevent fog build-up in all weather conditions and are ideal for the toughest conditions
• Mirrored lenses offer the maximum reduction of glare in bright light conditions for improved performance

100% Racecraft, Accuri, Strata MX Laminated Tear Offs, Accessory

• Get clear vision with a simple pull of the tab
• Available in standard and laminated versions
• Laminated tear-offs provide maximum clarity with reduced layers of film
• Fit Racecraft, Accuri and Strata MX goggles
• Standard tears-offs sold in 20-pack or 50-pack and laminated tear-offs sold in two packs of seven

100% Racecraft, Accuri, Strata MX Tear Offs, 20-Pack, Accessory

• Get clear vision with a simple pull of the tab
• Fit Accuri Junior goggles
• Sold in 20-pack
• Tear off pins are sold in a 3-pack

100% Single Layer Clear Goggle Tear Offs, 50-Pack, Accessory

• Get clear vision with a simple pull of the tab
• Available in standard and laminated versions
• Laminated tear-offs provide maximum clarity with reduced layers of film
• Fit Racecraft, Accuri and Strata MX goggles
• Standard tears-offs sold in 20-pack or 50-pack and laminated tear-offs sold in two packs of seven

100% Strata MX, Racecraft, Accuri Mirror Silver Replacement Lens, antifog, scratchresistant

• Motocross essentials for 100% Junior goggles
• All-purpose clear lens provides maximum amount of light allowance for all conditions
• Clear and smoke dual lenses prevent fog build-up in all weather conditions and are ideal for the toughest conditions
• Mirrored lenses offer the maximum reduction of glare in bright light conditions for improved performance

100% Strata MX, Racecraft, Accuri Orange Replacement Lens, antifog, scratchresistant

• Motocross essentials for Racecraft/Accuri goggles
• All-purpose clear lens provides maximum amount of light allowance for all conditions
• Clear and smoke dual-lenses prevent fog build-up in all weather conditions and are ideal for the toughest conditions
• Blue lens provides increased contrast for varying conditions and is ideal for medium to low light
• Yellow lens is perfect for flat, low light conditions and improves the contrast and definition of any obstacle
• Neutral tint smoke lens reduces glare while providing accurate color perception in medium to bright light conditions
• Persimmon and orange lenses are ideal for overcast conditions with improved depth perception and increased contrast
• Mirrored lenses offer the maximum reduction of glare in bright light conditions for improved performance

100% Strata MX/Racecraft/Accuri Yellow Replacement Lens

• Motocross essentials for Racecraft/Accuri goggles
• All-purpose clear lens provides maximum amount of light allowance for all conditions
• Clear and smoke dual-lenses prevent fog build-up in all weather conditions and are ideal for the toughest conditions
• Blue lens provides increased contrast for varying conditions and is ideal for medium to low light
• Yellow lens is perfect for flat, low light conditions and improves the contrast and definition of any obstacle
• Neutral tint smoke lens reduces glare while providing accurate color perception in medium to bright light conditions
• Persimmon and orange lenses are ideal for overcast conditions with improved depth perception and increased contrast
• Mirrored lenses offer the maximum reduction of glare in bright light conditions for improved performance

100% TEAR OFFS YOUTH ACC 20PK, Accuri Junior

• Get clear vision with a simple pull of the tab
• Fit Accuri Junior goggles
• Sold in 20-pack
• Tear off pins are sold in a 3-pack

10Mm Banjo Bolt W/Washers 3/8-24 X .778" Length Black, Goodridge # 775-03Bk

• Universal brake lines are the perfect solution for any brake or clutch line fitment for any bike
• Hose features clear or black PVC coating, PTE inner liner, and premium stainless steel braided armor
• PVC hose coating adds great looks, abrasion protection to expensive parts, and resistance to damaging UV rays
• PTE liner is an inert material compatible with all hydraulic and brake fluids, has a heat range of -158 degrees to 500 degrees, and shields brake systems from moisture, unlike other materials like nylon
• Stainless steel braid is superior in pressure rating, flame resistance, and volumetric expansion to all other materials, including Kevlar, resulting in unmatched stopping power
• All hardware is beautifully chromed mild steel with a 96 hour salt spray rating
• Best when used with Goodridge universal adapters Goodridge
  Black 3/8-24 (10mm x .778) Banjo Bolt with Washers
  (Imported)

10T One Piece Str Jackshaft Bt 94/L* W/102 T Cl Ring Gear Uw 89/L* Starter Mfg 79-2106

• One Piece hardened construction helps to prevent breakage common with high compression engines
• Eliminates the inner primary support bushing that sometimes creates alignment problems
• Includes 10-32 threaded bolt for 1989/1993 starter motors and a 1/4-20 threaded bolt for 1994/Later starter motors

All Balls
10 Tooth Pinion Gear for use with a 102 Tooth Clutch Ring Gear
.689 Bushing End O.D.
Fits Big Twin 1994/Later

12 Volt 2.9 Ohm Coil, Chrome ST 1985-99, FLT & Dyna 85-98,Spt 84-03,Fxr 85-94, OEM 31614-83A

• Designed for dual fire ignitions with single spark plug per head
• Produces 30,000 + volts (about 20% more voltage than the OEM coil)
• Styled after the 1983-1999 coil

V-FACTOR
2.9 OHM Chrome Plated Coil
Fits Softail 1985-1999, FXR 1985-1994, FLT 1985-1998 (except EI), Dyna 1985-1998, Sportster 1984-2003 (except 1200S)
Replaces HD# 31614-83A

12 Volt Minilight W/13"Wire Fits Lighted Mirror Stems 1.2 Watts & .1 Amp

• Bulb measures ¹/₂ long x ³/₁₆ wide
• Possible uses include:
  Interior saddlebag lighting
• Inspection light for shop use
• Replacement bulb for our lighted mirrors found in the control section
• Test light for onboard tool kit

V-FACTOR
Light Bulb for Custom Use
Includes 13 of sheathed lead wire
12 volt, 1.2 watt, .1 amp
(Imported)

12 Wire Male Socket Housing Uw Deutsh Socket Wire End Black,Hd 72119-94Bk,Mfg Dp-12B

• These are the same sealed connectors thatHarley Davidson^™ has been using since 1994
• Crimp type wire ends are designed for easy installation
• 13 AMP rating for 16 or 18 gauge wire
• The preferred choice of professionals

NAMZ Custom Cycle Products
Black Housing, 12 Connectors
Male Socket Housing
HD# 72119-94BK

12 Wire Male Socket Housing Uw Deutsh Socket Wire End Grey,Hd 72139-94Gy,Mfg# Dp-12G

• These are the same sealed connectors thatHarley Davidson^™ has been using since 1994
• Crimp type wire ends are designed for easy installation
• 13 AMP rating for 16 or 18 gauge wire
• The preferred choice of professionals

NAMZ Custom Cycle Products
Grey Housing, 12 Connectors
Male Socket Housing
HD# 72139-964GY

Cable Bty Ultra-Flexible Clear 12" Ctr/Ctr 1/4" & 5-16" Holes 4 Gauge Tinned Copper ..78-112

• Recommended for high compression engines
• 1,661 individual 36 gauge tin coated copper strands strategically woven for maximum current flow
• High performance battery cables will increase starter performance by supplying maximum battery current to the starter motor
• Offer you a custom braided stainless appearance with an ultra-flexible translucent jacket that is oil & gas resistant and rated at 287° while providing excellent performance and show quality good looks
• Kits include one battery positive terminal to starter motor cable and one battery negative terminal to ground cable
• eatures:
  • Copper ends with corrosion resistant Zinc Plating
  • Electrolytic-Grade copper strands
  • The look of braided stainless steel
  • All cables have one ⁵/₁₆ I.D. end and one ¹/₄ I.D. end
  • Cable ends are crimped on and include waterproof heat shrink
  • 4 gauge for high performance
  All Balls
  12 Individual Cable

12Mm Banjo Bolt W/Washers 7/16-24 X.900"Length Black, Goodridge #775-44Bk

• Universal brake lines are the perfect solution for any brake or clutch line fitment for any bike
• Hose features clear or black PVC coating, PTE inner liner, and premium stainless steel braided armor
• PVC hose coating adds great looks, abrasion protection to expensive parts, and resistance to damaging UV rays
• PTE liner is an inert material compatible with all hydraulic and brake fluids, has a heat range of -158 degrees to 500 degrees, and shields brake systems from moisture, unlike other materials like nylon
• Stainless steel braid is superior in pressure rating, flame resistance, and volumetric expansion to all other materials, including Kevlar, resulting in unmatched stopping power
• All hardware is beautifully chromed mild steel with a 96 hour salt spray rating
• Best when used with Goodridge universal adapters Goodridge
  Black ⁷/₁₆-24 (12mm x .900) Banjo Bolt with Washers
  (Imported)

12V Generator W/Regulator Blk Bt 65/69,Spt 65/E84,Servi-Car 65/73, Electric Start Only

• Integrated design combines the solid state regulator into the end of the generator for an uncluttered look with simplified wiring
• The regulator incorporates the armature support bearing to keep the overall length (7.58 from gasket surface fins) to a minimum
• The regulator not only controls voltage, it limits current (amps) in an inverse proportion by sensing the temperature of the armature. As the temperature increases, the amperage decreases. This provides more amps after a cold start to recharge the battery faster (5 minutes instead of 20) yet protects against overheating
• See the electric section for drive gear, oil deflector plate and gasket
• Instructions are included

V-FACTOR
Black Generator
Fits Big Twin 1965/1969, Sportster 1965/Early 1984 & Servi-Car 1965/1973 (also used to update 1958/1964 6 volt charging systems to 12 volt)

12V Generator W/Regulator Cp Bt 65/69,Spt 65/E84, Servi-Car 65/73, Electric Start Only

• Integrated design combines the solid state regulator into the end of the generator for an uncluttered look with simplified wiring
• The regulator incorporates the armature support bearing to keep the overall length (7.58 from gasket surface fins) to a minimum
• The regulator not only controls voltage, it limits current (amps) in an inverse proportion by sensing the temperature of the armature. As the temperature increases, the amperage decreases. This provides more amps after a cold start to recharge the battery faster (5 minutes instead of 20) yet protects against overheating
• See the electric section for drive gear, oil deflector plate and gasket
• Instructions are included

V-FACTOR
Chrome Plated Generator
Fits Big Twin 1965/1969, Sportster 1965/Early 1984 & Servi-Car 1965/1973 (also used to update 1958/1964 6 volt charging systems to 12 volt)

13"Wide Metal Seat Pan Custom Use Painted Black

• Seat pans ready for your custom upholstery
• Two versions to fit your needs
• 13 gauge pans are perfect for strength and durability
• Welded in place spring mount studs are 5/16-18 on 6 3/4 centers
• Front seat hinge studs are 5/16-18 on 3 1/4 centers

HARDBODY
Black Painted Metal Seat Pan
13 wide x 14 long
(Imported)

16" Rear Spoke Wheel, Chrome - 40700-08
16" Rear Spoke Wheel, Chrome

OEM No: 40700-08
16" X 3.00" Rear wheel includes a chrome hub with 25mm bearings, 40 chrome spokes and a chrome drop center rim with a small center valve stem hole.
**NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of original installation. *Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping costs.

Fits Harley-Davidson models:
FXST 2008-UP
FLST 2008-UP

UOM: 1 - EA
Country of Origin: Imported

2 Button Switch Clamp,Chrome Custom Use 2 Stainless Momentary Switches

• Custom billet switch for 1 handlebars
• Designed for internal wiring
• Perfect for minimalistic choppers and bobbers
• 2 stainless steel momentary switches
• Use for starters, horn, etc.
• Use our 16405 High-low Relay with this clamp for push button headlight high beam to low beam function
• See below for availability of finishes

V-FACTOR
Chrome Plated Clamp

2 Wire Male Socket Housing Uw Deutsh Socket Wire End Black,Hd 72112-94Bk,Mfg# Dp-2B

• These are the same sealed connectors thatHarley Davidson^™ has been using since 1994
• Crimp type wire ends are designed for easy installation
• 13 AMP rating for 16 or 18 gauge wire
• The preferred choice of professionals

NAMZ Custom Cycle Products
Black Housing, 2 Connectors
Male Socket Housing
HD# 72112-94BK

2 Wire Male Socket Housing Uw Deutsh Socket Wire End Grey,Hd 72132-94Gy,Mfg# Dp-2G

• These are the same sealed connectors thatHarley Davidson^™ has been using since 1994
• Crimp type wire ends are designed for easy installation
• 13 AMP rating for 16 or 18 gauge wire
• The preferred choice of professionals

NAMZ Custom Cycle Products
Grey Housing, 2 Connectors
Male Socket Housing
HD# 72132-94GY

2" Extension Kit For #45850 Dyna Models 2006/Later* Includes Hardware

• Converts mid shift models to forward controls
• Show quality chrome plating with all mounting hardware

V-FACTOR
Chrome Plated 2 Extension Kit
Fits Dyna 2006/Later
(Imported)

2" Lowered Kickstand Dresser Models 2007/Later* Use On Lowered Bikes

• When you lower your Dresser model, you have to use a shorter kick stand to allow correct lean angle when your bike is parked
• Handcrafted in the USA, TIG welded and hand polished to accept smooth show quality chrome plating
• Mounts on OE bracket and utilizes the OE kick stand spring
• Will also fit years back to 1984, but lean angles may vary

Pingel
Chrome Plated Kick Stand
Length: 2 Lowered ront, 1 Lowered Rear
Fits Dreser models 2007/Later